SW1X Audio Design Logo Circle Transparent
Integrated Amplifier Overview

SW1X Audio Design® Range of Integrated Amplifiers


It is all about Quality and not Quantity.

 

All of our Integrated Amplifiers are Pure Class A Valve Amplification with Zero NFB and most of them are Single Ended, producing therefore super Quality 2-8 Watts of power, which sound like 20-80 Watts when paired with with High Sensitivity Speakers (min 96dB/W/1m is recommended), where damping and dynamic delivery feels like 200-800 W

Being Valve amplifiers operated in Pure Class A, Single Ended mode without any kind of feedback, the circuit design is as elegantly simple as it can get.

Therefore, the quality of amplification is almost entirely dependent on the factor of Quality of Materials & Componets employed in the circuit design.

SW1X Performance System

All our Integrated Amplifiers are offered in 4 versions:

  • STD, all Copper wound, orient grain M6 EI Core OPTs
  • Special, all Copper wound Super HiB DC Core OPTs
  • Classic, Copper/Silver Windings, Super HiB DC Core OPTs
  • Signature, Silver/Silver Windings, Super HiB DC Core OPTs

AMP V Integrated Amplifer

AMP I is offered in Single Ended (SE), Parallel Single Ended (PSE) and Push Pull (PP) topologies, comes in 2 Versions (STD and Special) and also can be ordered with LPU Phono and DAC I Option.

SW1X Audio Design Overview HiFi Reference System Guide

Please refer to the specifications and their tube complement below:

 

SW1X AMP I “Genie” Integrated Amplifier

AMP I “Genie” SE (with LPU Phono “LPX” or DAC I “DX” Option)

  • Tube compliment: 1 x 6N1P Driver, 2 x EL84, 1 x 5U4G DHD Rectifier
  • Copper wound, orient grain M6 EI Core or Super HiB DC Core (50 Watt) Signal Output Transformers
  • Power Output about 2W depending on the tube and bias

 

AMP I “Genie” PSE

  • Tube compliment: 2 x 6N1P Driver, 4 x EL84, 2 x 5U4G DHD Rectifier
  • Copper wound, orient grain M6 EI Core or Super HiB DC Core (50 Watt) Signal Output Transformers
  • Power Output about 4W depending on the tube and bias

 

AMP I “Genie” PP

  • Tube compliment: 2 x 6CG7 Driver, 4 x EL84, 1 x 5U4G DHD Rectifier
  • Copper wound, orient grain M6 EI Core or Super HiB DC Core (50 Watt) Signal Output Transformers
  • Power Output about 6W depending on the tube and bias

 

SW1X AMP II “Electra” Integrated Amplifier

AMP II “Electra” Low Gain

  • Tube compliment: 2 x 6J5 Driver, 2 x 6V6 or 6L6, 1 x 5U4G DHD Rectifier
  • Copper wound, orient grain M6 EI Core or Super HiB DC Core (50 Watt) Signal Output Transformers
  • Power Output about 6W depending on the tube and bias

 

AMP II “Electra” High Gain

  • Tube compliment: 2 x 6SJ7 Driver, 2 x 6V6 or 6L6, 1 x 5U4G DHD Rectifier
  • Copper wound, orient grain M6 EI Core or Super HiB DC Core (50 Watt) Signal Output Transformers
  • Power Output about 6W depending on the tube and bias

 

SW1X AMP III “Trinity” Integrated Amplifier

AMP III “Trintiy” Low Gain

  • Tube compliment: 2 x 6J5 or 6SJ7 Driver, 2 x 45 DHT, 1 x 5R4G DHD Rectifier
  • Copper wound, orient grain M6 EI Core or Super HiB DC Core (50 Watt) Signal Output Transformers
  • Power Output about 2W depending on the tube and bias

 

AMP III “Trintiy” High Gain

  • Tube compliment: 2 x 6SN7, 2 x 45 DHT, 1 x 5R4G DHD Rectifier
  • Copper wound, orient grain M6 EI Core or Super HiB DC Core (50 Watt) Signal Output Transformers
  • Power Output about 2W depending on the tube and bias

 

SW1X AMP IV “Aura” Integrated Amplifier

AMP IV “Aura”

  • Tube compliment: 2 x 6SN7 or 6N6P/5687/E182CC Driver, 2 x 2A3 DHT, 1 x 5U4G DHD Rectifier
  • Copper wound, orient grain M6 EI Core OPTs (50 Watt) Signal Output Transformers
  • Power Output about 4W depending on the tube and bias

 

AMP IV “Aura” Special

  • Tube compliment: 2 x 6SN7 or 6N6P/5687/E182CC Driver, 2 x 2A3 DHT, 1 x 5U4G DHD Rectifier
  • Copper/Copper Windings, Super HiB DC Core (50 Watt) Signal Output Transformers
  • Power Output about 4W depending on the tube and bias

 

AMP IV “Aura” Classic

  • Tube compliment: 2 x 6SN7 or 6N6P/5687/E182CC Driver, 2 x 2A3 DHT, 1 x 5U4G DHD Rectifier
  • Copper/Silver Windings, Super HiB DC Core (50 Watt) Signal Output Transformers
  • Power Output about 4W depending on the tube and bias

 

AMP IV “Aura” Signature

  • Tube compliment: 2 x 6SN7 or 6N6P/5687/E182CC Driver, 2 x 2A3 DHT, 1 x 5U4G DHD Rectifier
  • Silver/Silver Windings, Super HiB DC Core (50 Watt) Signal Output Transformers
  • Power Output about 4W depending on the tube and bias

 

SW1X AMP V “Titan” Integrated Amplifier

AMP V “Titan”

  • Tube compliment: 2 x 6SN7 or 6N6P/5687/E182CC Driver, 2 x 300B DHT, 1 x 5AS4 DHD Rectifier
  • Copper wound, orient grain M6 EI Core OPTs (50 Watt) Signal Output Transformers
  • Power Output about 8W depending on the tube and bias

 

AMP V “Titan” Special

  • Tube compliment: 2 x 6SN7 or 6N6P/5687/E182CC Driver, 2 x 300B DHT, 1 x 5AS4 DHD Rectifier
  • Copper/Copper Windings, Super HiB DC Core (50 Watt) Signal Output Transformers
  • Power Output about 8W depending on the tube and bias

 

AMP V “Titan” Classic

  • Tube compliment: 2 x 6SN7 or 6N6P/5687/E182CC Driver, 2 x 300B DHT, 1 x 5AS4 DHD Rectifier
  • Copper/Silver Windings, Super HiB DC Core (50 Watt) Signal Output Transformers
  • Power Output about 8W depending on the tube and bias

 

AMP V “Titan” Signature

  • Tube compliment: 2 x 6SN7 or 6N6P/5687/E182CC Driver, 2 x 300B DHT, 1 x 5AS4 DHD Rectifier
  • Silver/Silver Windings, Super HiB DC Core (50 Watt) Signal Output Transformers
  • Power Output about 8W depending on the tube and bias

 

Reviews

SW1X Performance Levels

Follow us on Facebook, Instagram, YouTube and Pinterest. Join the official SW1X Audio Club

Related Products

Translate »